Welcome to visit JINAN SENYO MACHINERY CO.,LTD! Call us today! Tel:+86 15253141880
CNC automation equipment manufacturer
With an assemblage of research & development
Design, and production for 15 years.
Support and Service
Support and Service
Hot Products
latest news
contact us

Tel: +86 15253141880
Mob/Whatsapp/Skype: +86 15253141880
QQ: 2061579344
Address: Room 404-23, Building 3 , ZhongRun ShiJi Centre, 12111 JingShi Road , LiXia District, Ji'nan, Shandong, China (Mainland)

Quality Control

Home > Quality Control

Laser cutting machine operating procedures details, laser cutting machine use tips
The laser cutting machine replaces the traditional mechanical knife with an invisible beam. Due to its high precision and fast cutting characteristics, it is widely used in modern enterprises. The laser cutting machine has automatic typesetting to save materials and the slit is smooth. The advantage, but due to some problems in the use, may cause laser cutting deviation, the following follows the SENYO CNC to understand the details of the laser cutting machine operation.
Laser cutting machine operation details
During the use of the laser cutting machine, the operator must not leave. In the event of an accident, the operator must properly handle it, and the novice employee cannot be directly employed. Although the engraving machine operation room is relatively simple, it is necessary to carry out the necessary post. For the pre-training, SENYO teaches you 13 details of the safe working of the laser cutting machine:
1. Obey the general safe operating procedures of the cutting machine. The laser is activated in strict accordance with the laser's startup procedure.
2. The operator must be trained to familiarize with the structure and performance of the equipment and master the relevant knowledge of the operating system.
3. Wear protective clothing as required, and wear protective glasses that meet the requirements regardless of whether it is working near the laser beam.
4. Do not operate without knowing if a material can be cut with a laser to prevent dangerous consequences.
5. The device can not be transferred to another person for operation. If it is necessary to leave, please stop or cut off the power switch.
6. Take fire prevention measures and place the fire extinguisher in a position that is easily accessible. Do not place flammable materials such as cloth or paper around the laser to prevent fire.
7. If any abnormality occurs during the use of the laser cutting machine, stop immediately, troubleshoot or find common troubleshooting.
8. Keep the laser, bed and surrounding area clean, orderly and free of oil, and stack the workpiece, sheet and waste as required.
9. When using gas cylinders, avoid welding the welding wires to avoid electric leakage accidents. The use and transportation of gas cylinders should comply with the gas cylinder inspection procedures. Do not expose the cylinder to sunlight or heat sources. When opening the bottle valve, the operator must stand on the side of the bottle mouth.
10. Regular maintenance, pay attention to the use of safety regulations. Every 40 hours of operation or weekly maintenance, every 1000 hours of operation or every six months of maintenance, in accordance with the regulations and procedures.
11. After starting the machine, the machine should be started in the low speed X and Y directions to check if there is any abnormality.
12. After entering the new part program, you should try it out and check its operation.
13. When working, pay attention to observe the operation of the machine so as to avoid the cutting machine from coming out of the effective range or two accidents.
The above is the detailed details of the laser cutting machine operating specifications that we introduced for you. It is reminded that the operator of the laser cutting machine must pay attention to protect itself and protect itself and the machine.