Welcome to visit JINAN SENYO MACHINERY CO.,LTD! Call us today! Tel:+86 15253141880
CNC automation equipment manufacturer
With an assemblage of research & development
Design, and production for 15 years.
Support and Service
Support and Service
Hot Products
latest news
contact us

Tel: +86 15253141880
Mob/Whatsapp/Skype: +86 15253141880
QQ: 2061579344
E-mail:senyocnc1@senyocnc.com
Address: Room 404-23, Building 3 , ZhongRun ShiJi Centre, 12111 JingShi Road , LiXia District, Ji'nan, Shandong, China (Mainland)

Quality Control

Home > Quality Control

Fiber laser cutting machine five-point use skills
1) The double focal length laser cutting head is a fragile item on the laser cutting machine, which is used for a long time, resulting in damage to the laser cutting head.
2) Check the straightness of the track of the fiber laser cutting machine and the verticality of the machine every six months, and find that the maintenance and debugging are not normal. If you don't do this, it is possible that the effect of cutting out is not so good, the error will increase, and the cutting quality will be affected. This is a top priority and must be done.
3) Use a vacuum cleaner to absorb dust and dirt from the machine once a week. All electrical cabinets should be kept clean and dustproof.
4) Always check the fiber strip of the fiber laser cutting machine, and ensure that it is tight. Otherwise, if there is a problem in the operation, it may hurt people and seriously lead to death. The steel strip looks like a small thing, and the problem is still a bit serious.
5) The guide rails of the fiber laser cutting machine should be cleaned frequently to eliminate dust and other debris, to ensure that the normal rack of the equipment should be wiped regularly, and the lubricating oil is added to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently. The machine can move better during the process of travel, more accurate cutting, and the quality of the cut products will be improved. .

Precautions
The following precautions for operating a laser cutting machine are as follows:
1. Obey the general safe operating procedures of the cutting machine. Start the laser, dimming, and test the machine in strict accordance with the laser start-up procedure.
2. The operator must be trained to familiarize with the cutting software, equipment structure, performance, and master the operating system.
3. Wear labor protection articles as required, and wear protective glasses that meet the requirements in the vicinity of the laser beam.
4. Do not process a material before it can be irradiated or cut with a laser to avoid the potential hazard of smoke and vapor.
5. The operator must not leave the post or the person to be in charge when the equipment is started. If it is necessary to leave, stop or cut off the power switch.
6. When an abnormality is found during the processing, it should be stopped immediately, and the fault should be eliminated or reported to the competent personnel in time.
7. Keep the fire extinguisher at your fingertips; turn off the laser or shutter when not working; do not place paper, cloth, or other flammable materials near the unprotected laser beam.
RELATED PRODUCTS
RELATED PROJECTS
RELATED VIDEOS
RELATED ARTICLES
Online