CO2 laser cutting and engraving for 6 Sided Box Puzzle

Work Steps:Downloaded the SU model, then → CorelDraw → Laser WorkWe compensated by making the channels in two of the sides 1.5mm wider Increasing the overall length of those two sides by 3mm We engraved the dice markings on the respective insides of the laminated sides. With the engravings

Laser Engrave Candle Stamps

Soap Stamp – Deep EngravingSame as regular but engraving recess is about 1/8 – 1/4″ (close to 1/4″) with more even back plate this stamp will allow deeper imprints without worries about back plate touching your material.

wood engraving works

Sheep-box vector model

Sheep-box vector modelReady for laser cut and laser engravingCreate of plywoodMaterial thickness:– 3,0 mm;– 3,2 mm (1/8 inch)Dimension internal: 84x64x27 mm (3,3×2,5×1 inch)Dimension external: 137x76x60 mm (5,4x3x2,4 inch)

Box with sliding bolt latch

Box with sliding bolt latchSuitable for business card holder, playing cards box, cigarette case, jewelry box, gift box, boxCreate of plywood 3,2 mm (1/8 inch)

Elegant wine box horizontal

Elegant wine box horizontalElegant wine box with handleHorizontal position of bottle.Laser cut vector model / project plan with engraving.Material thickness:• 3,2 mm (1/8 inch)• 4,0 mm (5/32 inch)Dimensions internal: 323x84x84 mm (12,7×3,3×3,3”)Dimensions external: 350

Vintage engraving by Oscar Pletsch

Vintage engraving by Oscar PletschBMP files ready for laser engraving.Parameters for 40 watt power laser (Program: RDCAM)Processing Mode: ScanSpeed(mm/s): 400Max Power(%): 40Interval(mm): 0.05Material: solid birch, plywood birch