Designing the Sign
Cutting and Sanding
Plywood and put masking paper on both sides before cutting all the parts on a laser cutter at my local maker space. After cutting I removed the masking paper. Sometimes this will raise a few thin wood fibers. Light sanding with 120 grit sandpaper takes care of this and gives the wood a smooth surface ready for painting.
Next, I applied a coat of linseed oil to the circle and set it aside to dry. Just make sure to get rid of all the fine dust from sanding before doing this to get a nice and even finish.
Gluing the Name and Other Elements on the Backer
Adding a String to Hang the Name Sign
After all elements were placed on the backer and the glue had dried, I decided to add a string to the back of the sign so that it could hang on a wall or somewhere else. To make sure that my sign will hang straight, I placed a ruler below the name and then put a small pencil mark on the left and right edge of the circle.
• Previous: Bus & garage
Jacob from United States
I am a beginner at CNC, I’ve never used a CNC machine before and with in a day I was carving. An awesome machine for a beginner to learn as hobbyists. I used the manual and the help video. One hour to assemble and test, very friendly and easy to use. It’s a good buy for the money. I would definitely recommend this machine to someone getting into CNCs.
Weinstein from France
I've been using CNC plasma SYP2060-300A and I am very impressed with this unit.
This unit is of higher quality, made in China. Five stars all the way!
Thanks for 3D CNC Router, so much 3D works, just everyday use machine works.that is what makes the magic happen. from
Thanks for 3D CNC Router, so much 3D works, just everyday use machine works.that is what makes the magic happen.
I'm getting a little bit closer to completing more art deco jewelry use fiber laser marking machine.Thank you Senyo from
I'm getting a little bit closer to completing more art deco jewelry use fiber laser marking machine.Thank you Senyo
Thank you Senyo for SYJ1290-150W! from
Retired, ex mainframe systems programmer. Now full-time recreational woodworker majoring in puzzles, pens, boxes, Toys and occasional small furniture. Thank you Senyo for SYJ1290-150W!
CNC Router I love woodworking and the Joy in the Journey! It's a Blessing! from Ricky
CNC Router I love woodworking and the Joy in the Journey! It's a Blessing!
CO2 1530H-300W Europe from
CO2 1530H-300W All really well done. these are something ive always wanted to do.
4040 Mini Desktop CNC Router for Small Business from France
Good Machine! Wonderful Service !
Thanks Senyoqc Team for whatsapp Group services , Excellent enginner ! Good work!
SYM1530ATC-A2 from
Thank you Aillen, You are really good person for advice model and service. My furniture work doing very good, thanks
1530 CNC Plasma from Australia
This CNC plasma cuts very easy Very good machine .
But I also recommend purchasing the nozzles and the tips of the torch consumables oarts they wear out quickly and for a good operation they must be in good condition.